Data-driven process
The 5AXIS Laboratory conducts precise research on products and materials, evaluating their compliance with 5AXIS criteria. The lab also identifies needs, contributes to personal protective equipment…
Determination of water vapor permeability (WVP) (in-house method based on ISO 20344 modified)
Test used to measure the ability of a material, typically used in footwear, to allow water vapor to pass through it. This test assesses how well a material can breathe, meaning how effectively it…
Hydrocarbon resistance test – Oil repellency (ISO method, ISO 14419)
Standardized test used to evaluate the ability of materials to resist and repel hydrocarbon-based liquids, such as oils and greases. This test assesses the material's resistance to staining and…
Determination of water absorption by capillary action (wicking) (in-house method and ISO method, ISO 19074)
Test used to measure how well a material absorbs and transports water through capillary action. This test assesses the ability of a material to draw water in and distribute it within its structure.…
Determination of upper/*ousole and sole interlayer bond strength (ISO method, ISO 20344)
Method used to measure the strength of the bond between the upper part (the material that covers the foot) and the sole of a shoe, including any interlayer between them. During this test, the shoe's…
Determination of tear force of trouser-shaped test specimens (Single tear method) – (ISO method, UNE-EN ISO 13937-2)
test used to assess the tear resistance of fabric materials, specifically trouser-shaped specimens. In this test, a fabric sample shaped like a trouser leg is subjected to a controlled force,…
Determination of the internal volume in the toe area of finished footwear
Test used to measure the available space or volume inside the toe area of a completed shoe. This test provides information about the roominess and fit of the shoe's front portion, where the toes are…
Dynamic Footwear Stiffness Test for complete footwear (in-house method)
Method used to assess the overall stiffness and flexibility of a complete shoe, including both the upper and the sole. This test evaluates how a footwear product behaves under dynamic conditions,…
Protection against flame – Method of test for limited flame spread (ISO method, ISO 15025)
A standardized test used to evaluate the flame resistance of protective clothing or textiles. This method assesses how a material responds when exposed to a flame, simulating potential fire hazards.……
Colour fastness to domestic and commercial laundering (ISO method, UNE-EN ISO 105-C06)
A test method used to evaluate the ability of textile materials to retain their color when subjected to repeated washing cycles, both in domestic and commercial settings. In this test, fabric…
Determination of dimensional change in washing and drying (ISO method, UNE-EN ISO 5077)
Standardized test method used to measure the change in size of textile materials after undergoing washing and drying cycles. In this test, fabric samples are measured before being subjected to…
Test methods for uppers, lining and insocks – Abrasion resistance (in-house method based on EN 13520/A1 modified)
Test used to measure the resistance of materials used in the upper part of shoes, linings, and insocks (inner sole) to abrasion. During the test, the material is subjected to controlled abrasion by…
Determination of tear strength on leather (ISO method, ISO 20344; ISO 3377-2)
Method used to measure the resistance of leather materials to tearing. In this test, a sample of leather is subjected to controlled force in a specific direction to induce tearing. The force required…
Dexterity test for gloves (in-house method / ASTM method)
The "Dexterity Test for Gloves" is a method used to assess the level of dexterity or fine motor skills that can be maintained while wearing gloves. This evaluation is intended to ascertain an…
Grip test for gloves (in-house method)
Test designed to assess the grip capability of gloves. It involves subjecting the gloves to conditions that simulate gripping situations on various surfaces. During the test, the force required to…
Comfort
Why comfort makes us more effective and how the lack of it affects us, explains Juan Francisco Iturri.
Durability
Running a business is inseparably associated with taking care of broadly understood costs. Yolanda Martinez talks about how choosing sustainable solutions translates into reducing financial and…
Image
Does the appearance of workwear translate into the safety of employees and how does it affect the image of the company, says Javier Reina.
Functionality
Javier Munoz explains why we should start the selection process from knowing the needs, what to consider when making decisions and what is the importance of functionality.
Sustainable development
Sustainability is not just a trend of the moment, a pending project, nor is it philanthropy. The role of the modern leader is to make decisions without ever losing sight of the greater purpose.…